Flameproof Solvent Vapors Detector-Transmitter E2658-VOC

Evikon MCI
  • Suitable for ATEX Zones 2 and 22
  • Stable long-life metal-oxide gas sensor
  • Range 0...100% LEL or 0...100 to 0...1000 ppm
  • Resolution 0,1 %LEL/1 ppm
  • 2 × 4-20 mA / 0-10 V, RS485
  • Two SPST relays (option)


E2658 series is a new line of flameproof transmitters intended for use in ATEX Zones 2 and 22. 

E2658 series devices are based on PluraSens® multifunctional platform.

Solvent vapors transmitter E2658-VOC is intended to detect ethanol, toluene, xylene and other VOCs.

The instrument utilises novel fully calibrated and temperature compensated metal-oxide gas sensor with excellent repeatability, stability and long lifetime. 

According to user's preferences the detection range may be set to either 0...100% LEL (for fire prevention) or to toxicity range from 0...100 ppm to 0...1000 ppm of target gas.

To connect the detector to safety or building automation systems use two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol.

Two relays with closing contact (option) may be used for remote signalling or ventilation control. Default alarm set-points are typically at 20% LEL and at 50% LEL for 0...100% LEL range and at 100 ppm and 300 ppm for 0...500 ppm range.


Detected vapors Acetone, Benzene, Ethanol, Ethyl Acetate, Toluene, Xylenes etc
Default calibration Toluene
Sensor type Metal-oxide semiconductor
Sampling method Diffusion
Detection range 0...100 %LEL or 0...100 to 0...1000 ppm
Resolution 0,1 %LEL/1 ppm
Accuracy ± 2 %LEL
Sensor lifetime > 5 years
Power supply 11...30 VDC, 24 VAС, or 230 VAC
Digital interface RS485, Modbus RTU protocol
Analog outputs 2 × 4-20 mA / 0-10 V, user settable
Output relays (option) 2 × SPST relays (closing contact),
250 VAC / 30 VDC, 5 A max
Enclosure Grey die-cast aluminium, wall mount
Protection class IP66
Dimensions H120 × W125 × D57 mm
Operating conditions -30...+70 °C, 15...95 %RH
normal ambient oxygen level
Safe areas and ATEX Zones 2 and 22